Difference between On-Car and Off-Car Injection Cleaning

Difference between On-Car and Off-Car Injection Cleaning


Carburetors were used in the past to deliver fuel to the engine, but modern day automobiles use fuel injection systems. The sophisticated systems deliver just the right amount of fuel to ensure that the engine runs optimally. Increased fuel efficiency, decreased emissions and improved performance are the benefits of using modern day fuel injection systems, such as the Bosch fuel injectors. Continuous usage of your vehicle will result in buildup in the fuel injectors. Regular cleaning and maintenance of fuel injectors to maintain performance and mileage.

Benefits of fuel injector cleaning

The advantages of cleaning the fuel injector directly depend on the condition of the injector. When you experience lags in your car and it doesn’t offer a good mileage anymore, it is time for fuel injection cleaning. The fuel injectors are clogged mainly due to the use of cheap gasoline. When you purchase advanced fuel injectors, such as the Ford fuel injectors, you may not read a fine print suggesting to use high-quality gasoline.

High-quality gasoline has about 1000 parts per million of detergent in the fuel. This is not expensive for the gasoline suppliers. However, more than 85% of the gas sold, has only one-tenth of the recommended level. This means that the cheaper gas you use for your engine doesn’t have an effective self-cleaning mechanism and as a result, there will be a buildup of chemicals in the fuel injection system.

Engines designed to provide high-mileage and cars designed for several short trips will benefit greatly from a thorough fuel injection cleaning service. Experts recommend that you take your car for fuel injection cleaning at least every 25,000 to 30,000 miles. If you experience any limitation in the performance of your vehicle, you should clean fuel injectors right away.

On-car and off-car fuel injection cleaning

You can clean the fuel injectors without removing those from the car. This involves supplying the cleaner through the fuel injection system, to remove the dirt and debris. This could be a DIY project because the fuel injection cleaning systems are readily available. You need to purchase a cleaning kit that is compatible with the make and model of your fuel injection system. While it is not very expensive, you need to have extensive knowledge on assembling and disassembling fuel injectors, to make this on-car cleaning effective. Also, when there is too much dirt accumulated in the system, on-car cleaning won't be useful.

Off-car fuel injection cleaning provides a thorough cleaning of the fuel injectors and the end result will be a fuel injection system that will be good as new. It should be done by a professional, as it requires special equipment for cleaning the fuel injectors. It can cost you more, but once fuel injectors are cleaned professionally, you don’t have to worry about the performance for another 30,000 miles. The cost of maintenance will be offset by the money you save on fuel and regular car maintenance. The biggest benefit of using off-car cleaning service is that the fuel injectors will undergo flow-testing to ensure optimal performance after cleaning.


German Quality Fuel Injectors:
Pte fuel injectors
Siemens Deka fuel injectors
Marantz fuel injectors
Tre fuel injectors
Rc fuel injectors
Ford racing injectors
Fic fuel injectors
Accel fuel injectors

Understanding the Lifetime of Fuel Injectors

Understanding the Lifetime of Fuel Injectors


Fuel injectors are one of the major components of the vehicle, as they spray an appropriate amount of pressurized fuel to fire up the engine. Leading models such as Bosch fuel injectors can last for 1 billion cycles. Theoretically, it means that the fuel injectors should last the lifetime of your car. Practically, it is not the case. The driving conditions, fuel composition and other real world issues cause the fuel injectors to fail, even before their lifetime.

Fuel injectors are thoroughly tested in the laboratory working conditions and the lifetime is usually determined after applying the real-road factors. However, actual conditions on the road can be entirely different from the laboratory conditions. Everything including your driving style, road conditions, weather, fuel quality, maintenance cycle and others influence the lifetime of the fuel injectors. Typically, the fuel injectors will work properly up to 50,000 – 100,000 miles, after which a replacement becomes necessary.

When you have installed state-of-the-art ford racing injectors, you can prolong their life by following some simple maintenance practices. The first thing you should do to extend the lifetime of fuel injectors is using high-quality fuel. While it is expensive, it will help you to maintain engine performance and prevent degradation, extending the life of your car itself. Cheap gasoline lacks the amount of additives required to prevent a buildup of carbon and debris.

You should choose your vehicle depending on your driving habits. Frequent stops and short trips result in accumulation of more debris in the fuel injectors. By choosing the right model, you can postpone the necessity of replacing the injectors. The fuel filter is responsible for keeping most of the debris from entering the fuel injectors. It requires regular replacement, so that the dirt doesn’t circulate inside the high-performance injectors. You should always replace fuel filters according to the manufacturer requirements.

Running a fuel injector cleaner from time to time will help you to reduce accumulation of debris. The DIY cleaning kits can be used, without removing the fuel injectors from the car. You can use these kits to clean the fuel injectors at home for every 10,000 miles. You should be extremely careful while using the cleaner kit and follow the steps properly to prevent damage to the car engine. It is better to take your car for a thorough and professional fuel injector cleaning, every 30,000 miles to ensure that you don’t have to replace it sooner.

If you have problems in engine performance, power or mileage, your mechanic may suggest replacing fuel injectors. It is an expensive task and you may not be ready for it. If you don’t listen to the advice of the experts, you will end up damaging your car’s engine beyond repair. Bad fuel injectors must be replaced quickly, to ensure that your car’s engine is maintained properly. When you replace the worn out fuel injector in your vehicle, you will immediately notice an improvement in performance. The money you spend for top class Accel fuel injectors will be worth it.

Aeromotive 340 Stealth Fuel Pump Installation

Aeromotive 340 Stealth Fuel Pump Installation

The fuel pump is responsible for providing your car’s engine, with a pressurized fuel. Modern day electrical fuel pumps are submerged in fuel tanks for optimal performance. The fuel pump design has changed a great deal, compared to the olden days.

As the high-pressure equipment is kept immersed in liquid, the chances of overheating are very less. Even if the fuel pump creates a spark, it will be controlled without any setback within the tank. Also, when the fuel tank is placed away from the engine, it adds to the safety factor. In the case of collision, the chances of the fuel tank exploding are quite low, which enhances overall safety. The fuel pump performs the most important task, to ensure vehicle performance.

When you need to replace the fuel pump in your car, the Aeromotive 340 stealth in-tank fuel pump is the best choice. This fuel pump provides 30% more fuel flow, which means that your car can always operate at its peak performance levels. This fuel pump bolsters onto the existing assemblies, allowing you to easily replace the pump, as and when it is needed. For almost all vehicles that are compatible with aftermarket pumps, the Aeromotive 340 pump can be used.

The fuel pump must be replaced, when you have issues with the flow of the fuel. Problems such as a slow flow of the fuel, low or absent fuel pressure could all indicate a problem with the fuel pump. When the fuel and air are not mixed in the right amount to generate enough pressure, your car’s mileage could suffer. Replacing fuel pump is a DIY job, if you are an experienced car owner, with a complete understanding of the owner’s manual.

Before working with fuel pump installation, drain the fuel tank, as much as possible. The fuel injected vehicles require depressurizing the fuel system first, before replacement. Otherwise, fuel may be sprayed at very high pressure and it could result in fire accidents. The in-tank fuel pumps are usually fitted from the top. Removing the back seat of your car will expose an access panel underneath, which you can find the fuel tank. After locating the empty fuel tank, remove the fuel pump. Disconnect the fuel line and remove the fuel pump from the tank. Disconnect the wires from the pump, before removing it. Before removing the tank entirely, you should note down the placement of these wires, so that you know how to do it right, while installing the new Aeromotive 340 fuel pump.

The installation process is easier, compared to the removal process. You need to insert the fuel pump inside the tank. Then, connect the fuel lines. The retaining strap under the fuel tank must be properly fitted. This may vary depending on the model of the car. Then, you should connect the filler tube hose and the electrical connector. Finally, you can connect the negative battery cable. When you complete these steps without a glitch, you can fill the fuel tank with gasoline and test the vehicle on the road.

Fuel Injector Problems and Their Effect on Engine Performance

Fuel Injector Problems and Their Effect on Engine Performance

Clogged injector filters • electrical defect in injectors • Engine Performance • Fuel Injector Problems • Injector winding problems


Fuel injectors are meant to work in extreme heat and pressure conditions. They are manufactured to perform optimally for several billion cycles. Ideally, the fuel injectors should last the lifetime of cars, but it is rarely the case. Fuel injectors fail because the vehicle is never driven in ideal conditions on the road. The fuel injectors atomize the fuel and send it as a steady and straight jet of fuel, to the engine to fire up. Any malfunctioning of the fuel injector will result in angled spray pattern, which is not useful to enhance engine performance.

#1 Unused fuel becomes baked

Improper fuel system maintenance will result in the creation of heatsink, which will heat up unburned fuel, causing it to bake. These participles will form a layer over the injector orifice and pintle, altering the spray pattern. The faulty cooling system will result in continuous overheating of the engine, reducing its performance. In the long run, the O2 sensor will get damaged and the engine will be over fueled to compensate for the loss of performance.

#2 Clogged injector filters

Any foreign particles in the fuel rail, fuel lines or fuel tanks will clog the injector filters or fuel filters. This will inhibit the fuel flow and affect the spray pattern. Routine maintenance will keep your vehicle in proper condition. In most of the circumstances, the foreign particles are rust, which affects the engine performance. The under fueling will make the engine sluggish and it could also result in overheating. In closed loop O2 systems, the engine is usually over fueled, to counter the effects of clogged filter.

#3 Injector winding problems

Regular use of fuel injectors could result in wear and tear. The coil windings of the injector may become overheated, due to cooling problems. When the windings lose their magnetic performance, it could result in broken or open windings. The internal parts of the injector may rust, when the engine is not operated regularly. Contaminated petrol with water particles or other adulterants can cause the cooling system to fail. When the pintle is not properly placed, it could result in fuel leaks.

#4 Mechanical and electrical defect in injectors

Sometimes, defective manufacturing will result in mechanical leaks in the injector. It could also result due to the improper handling of the injector, during the installation or removal process. Ignition system failure will be a direct result of a non-functioning injector. Mechanical problems could also result in overheating of injectors. In such cases, engine fuel fire is a common and dangerous consequence. There is also a huge potential for engine damage. The ECU is the electrical unit that controls the injectors. Improper electrical connectivity will result in misfiring or weak firing. This could happen during improper storage or careless vehicle maintenance.

Fuel injector problems will result in poor engine performance and poor fuel economy. Fuel leaks are far more dangerous and they should be addressed immediately. The best method to deal with fuel injector problems is a replacement and proper maintenance thereafter.

Corvette Headlight Replacement Lens

Corvette Headlight Replacement Lens

General Motors launched the Chevrolet Corvette model in 2005, which was scheduled to be commissioned in 2013. The car is affectionately referred to as C6 and the exposed headlights are one of the most attractive features of the vehicle. The headlight comes with acrylic or plexiglass cover. GM continued to provide support for the C6 headlight and lenses for a while, until 2015. These were available with the OEM supplier a few years ago. However, now the production of the lenses and headlight assemblies have been discontinued. This means that you need to find a reliable third party supplier that won't drain your bank account.

Headlight lens issues

The headlight is certainly very important, especially if you don’t always drive in daylight conditions. As you drive your car on the road, the headlights are subjected to regular wear and tear. The amount of abuse the headlights undergo determine their longevity. The headlight lenses will lose their potential due to severe exposure to UV rays. The seals between the inner and outer cover may experience micro fissures, which will affect the efficiency of your car headlights. The headlight lens may just fail because of impact from the debris on the road. Dimming headlights and lights casting a yellow shade should be addressed at the earliest to ensure proper road visibility.

Best C6 headlight replacement lens is just a click away

Finding the right C6 headlight replacement lens is now easy as HighPerformanceInjectors has updated its inventory of C6 headlight lens. The high demand for our world-class headlight replacement lens encouraged us to air express 500 lenses and 500 more lenses will be added to our inventory in the next few days.

Our specialty C6 headlight replacement lenses are reinforced with UV protection, through our professional grade UV protection polyurethane hardened clear coat. This adds necessary UV protection to the existing polycarbonate plastic of the headlight lenses. The advanced protection ensures that the lenses don’t fade, get yellow or fog for the next 10 years. No other manufacturer is capable of providing such a quality assurance for headlight lens.

Our website is the best place to purchase C6 Corvette replacement headlights because we offer a pair of lens for just $289, including shipping. Unlike other manufacturers, we don’t intend on increasing the price soon, due to the demand for the lenses. The high-quality lenses match the manufacturer requirements and you will find it easier to replace the headlight lenses on your own. You have to take action immediately, when you notice your headlights going dim before they burn out completely.

Replacing headlight lens can be done, if you understand the owner’s manual. The exposed headlight design of the C6 Corvette makes it easy to replace the lens on your own. However, you should never attempt a DIY replacement project, if you are not sure of the car’s mechanism. You can refer to videos on YouTube for replacement instructions. If you are unsure of your skills, it is best to leave the task to the professionals.